On Tue, 4 May 2010, Michael K. Smith wrote:
It looks like you only have 256 Mb of Packet Ram. You should probably upgrade to 512 MB. I run multiple full peers on 3 port GE cards with no trouble, but they are all set to 512/512.
Engine 2 linecards has a max of 256 megs of route memory, so I think you're confusing this with the 4 port Engine 3 ones which indeed takes more ram.
And did you indeed mean packet ram, why would the packet memory be important in this case? If it's a number of routes problem, it's route memory that should be the point.
<http://www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a00801e1dbe.shtml#dram-route-mem> -- Mikael Abrahamsson email: [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
