Hello Ivan, no currently it is not possible to simulate (proper term is actually emulate) anything else "above" PVST+, as the only switch oriented card in dynamips is NM-16ESW - which only supports PVST+.
Due to the proprietary hardware used in switches, I don't think you will find any other emulator that does this (not speaking about the fact that AFAIK there is no other cisco emulator then dynamips). -pavel On Wed, Jun 16, 2010 at 2:44 PM, Ivan Šimko <ivan.si...@gmail.com> wrote: > Hi all > > I'd like to ask You if is possible simulate network in GNS for etherchannel > with mst and QoS. If not please can You recommned any simulator for? > > Thanks a lot > > Ivan > _______________________________________________ > cisco-nsp mailing list cisco-...@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/