hmmm :-( thanks a lot
On 16 June 2010 14:35, Pavel Skovajsa <pavel.skova...@gmail.com> wrote: > Hello Ivan, > > no currently it is not possible to simulate (proper term is actually > emulate) anything else "above" PVST+, as the only switch oriented card > in dynamips is NM-16ESW - which only supports PVST+. > > Due to the proprietary hardware used in switches, I don't think you > will find any other emulator that does this (not speaking about the > fact that AFAIK there is no other cisco emulator then dynamips). > > -pavel > > > On Wed, Jun 16, 2010 at 2:44 PM, Ivan Šimko <ivan.si...@gmail.com> wrote: > > Hi all > > > > I'd like to ask You if is possible simulate network in GNS for > etherchannel > > with mst and QoS. If not please can You recommned any simulator for? > > > > Thanks a lot > > > > Ivan > > _______________________________________________ > > cisco-nsp mailing list cisco-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/