Nick Voth wrote: > Hello folks, > > Please forgive the newbie question. I've looked online in various places but > can't just seem to find a simple sample config. > > I've never really had to deal with VLANs on the Cisco IOS before. I have a > situation where we need to plug a 2620 in to an Ethernet LAN and tag the > traffic with 301.
You want to create a subinterface and set the encapsulation to dot1q (assuming you are using 802.1q vlan tagging and not ISL, if so just omit the encapsulation line) ! int FastEthernet0/0 description Connected to LAN no ip address ! int FastEthernet0/0.301 encapsulation dot1q 301 ip address x.x.x.x y.y.y.y ! Hope this helps. David. > > Does anyone have a sample config that shows the creation of the VLAN and how > to tag the traffic? > > Thanks very much, > > -Nick Voth > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- David Freedman Group Network Engineering Claranet Group _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
