interface FastEthernet0/1 no shutdown ! interface FastEthernet0/1.301 encapsulation dot1q 301 ip address 1.2.3.4 255.255.255.0 !
IIRC, you may need IP-Plus or a desktop image (d-mz) to do dot1q on 2600.. (I could be wrong).. -- Tim On Mon, Jun 28, 2010 at 9:29 AM, Nick Voth <[email protected]> wrote: > Hello folks, > > Please forgive the newbie question. I've looked online in various places > but > can't just seem to find a simple sample config. > > I've never really had to deal with VLANs on the Cisco IOS before. I have a > situation where we need to plug a 2620 in to an Ethernet LAN and tag the > traffic with 301. > > Does anyone have a sample config that shows the creation of the VLAN and > how > to tag the traffic? > > Thanks very much, > > -Nick Voth > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
