Thanks Tim. I knew it had to be simple. Yes, we have IP-Plus image or higher.
Thanks again! -Nick From: Tim Jackson <[email protected]> Date: Mon, 28 Jun 2010 10:10:34 -0500 To: Nick Voth <[email protected]> Cc: <[email protected]> Subject: Re: [c-nsp] Simple VLAN Tag question interface FastEthernet0/1 no shutdown ! interface FastEthernet0/1.301 encapsulation dot1q 301 ip address 1.2.3.4 255.255.255.0 ! IIRC, you may need IP-Plus or a desktop image (d-mz) to do dot1q on 2600.. (I could be wrong).. -- Tim On Mon, Jun 28, 2010 at 9:29 AM, Nick Voth <[email protected]> wrote: > Hello folks, > > Please forgive the newbie question. I've looked online in various places but > can't just seem to find a simple sample config. > > I've never really had to deal with VLANs on the Cisco IOS before. I have a > situation where we need to plug a 2620 in to an Ethernet LAN and tag the > traffic with 301. > > Does anyone have a sample config that shows the creation of the VLAN and how > to tag the traffic? > > Thanks very much, > > -Nick Voth > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
