Thanks guys... I was afraid I would hear your "solutions" I think I will try to persuade Cisco to solve this issue, and in the mean time have Rancid ignore the level 7's :-(
Martin > -----Original Message----- > From: cisco-nsp-boun...@puck.nether.net > [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Alan Buxey > Sent: 05/07/2010 19:49 > To: David Freedman > Cc: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] [rancid] Cisco L2tp class with password > and rancid > > Hi, > > > > I have an issue when I configure a l2tp-class with a > password in it, every > > > time I do a "sho run" the level 7 encrypted password is > shown differently. > > > When using Rancid for config backups, every time Rancid > runs I receive a > > > complaint my config has "changed". > > I've had this issue with several devices and its been fixed by cisco. > > recently, however, have had the same with the level 7 password > for energywise. the 'fix' is to not have it encrypted in the config > and save it as plain text (level 0) - thats not acceptable. you'll > have to do what i did - reconfigure rancid to ignore that value. > > > alan > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/