Alan, For energywise, I found CSCte69094 which should fix the issue in 12.2(53)SE1...
Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Alan Buxey Sent: Monday, July 05, 2010 20:49 To: David Freedman Cc: [email protected] Subject: Re: [c-nsp] [rancid] Cisco L2tp class with password and rancid Hi, > > I have an issue when I configure a l2tp-class with a password in it, every > > time I do a "sho run" the level 7 encrypted password is shown differently. > > When using Rancid for config backups, every time Rancid runs I receive a > > complaint my config has "changed". I've had this issue with several devices and its been fixed by cisco. recently, however, have had the same with the level 7 password for energywise. the 'fix' is to not have it encrypted in the config and save it as plain text (level 0) - thats not acceptable. you'll have to do what i did - reconfigure rancid to ignore that value. alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
