Hi John, My piece of l2tp config:
l2tp-class <class-name> authentication <more config lines> password 7 <level-7-encrypted-pass> <more config lines> Martin cisco-nsp-boun...@puck.nether.net <> wrote on 07/07/2010 07:14: > Mon, Jul 05, 2010 at 06:49:04PM +0100, Alan Buxey: >> Hi, >> >>>> I have an issue when I configure a l2tp-class with a password in >>>> it, every time I do a "sho run" the level 7 encrypted password is >>>> shown differently. When using Rancid for config backups, every >>>> time Rancid runs I receive a complaint my config has "changed". >> >> I've had this issue with several devices and its been fixed by cisco. >> >> recently, however, have had the same with the level 7 password >> for energywise. the 'fix' is to not have it encrypted in the config >> and save it as plain text (level 0) - thats not acceptable. you'll >> have to do what i did - reconfigure rancid to ignore that value. > > if you provide examples of these config lines, l2tp and energywise, > i'll provide a hack to filter them within rancid. > > they should, however, not change in the config and you should complain > to cisco to get it fixed so that you can have them archived by rancid > without the oscillating. > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/