-----Original Message----- From: Reinhold Fischer [mailto:[email protected]] Sent: Sunday, July 11, 2010 11:12 AM To: Church, Charles Cc: [email protected] Subject: Re: [c-nsp] 10 gig ethernet interface up, line protocol down on VSL connection
>Are you negotiating the channel (PAGP/LACP) or is it configured to >channel mode "ON"? IIRC Cisco recommends "ON" for the VSL. The >behaviour that you descibe looks like one interface is configured to >mode ON and the other end tries to negotiate the portchannel. >hth, >Reinhold Yep, I'm using 'on'. Here's the config for the Po and physical ints. Same on the other one too: interface Port-channel10 description Switch 1 link to Switch 2 no switchport no ip address switch virtual link 1 mls qos trust cos no mls qos channel-consistency end Router#sh run int t1/5/4 Building configuration... Current configuration : 116 bytes ! interface TenGigabitEthernet1/5/4 no switchport no ip address mls qos trust cos channel-group 10 mode on end Thanks, Chuck _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
