Thanks Brad.  I did that step on both, both of them rebooted, but both come up 
as the active sup, since the VSL link won't come up.  The config on switch 2 is 
correct Reinhold, using port channel 20 and link 2 on that one.  I'll be back 
with the devices tomorrow morning, I'll dig through the logs and some other int 
troubleshooting tomorrow.

Chuck 

-----Original Message-----
From: Brad Hedlund (brhedlun) [mailto:[email protected]] 
Sent: Sunday, July 11, 2010 12:19 PM
To: Church, Charles
Cc: Reinhold Fischer; [email protected]
Subject: Re: [c-nsp] 10 gig ethernet interface up, line protocol down on VSL 
connection


Charles,
FWIW, this happened to me once and it turned out I forgot the last  
step in the VSS conversion process:

'switch mode accept virtual'.

Cheers,
Brad

Sent from my iPhone

Brad Hedlund, CCIE 5530
Cisco Systems, Inc.
Technical Solutions Architect
Data Center
http://bradhedlund.con


On Jul 11, 2010, at 11:09 AM, "Church, Charles" <[email protected] 
 > wrote:

> -----Original Message-----
> From: Reinhold Fischer [mailto:[email protected]]
> Sent: Sunday, July 11, 2010 11:12 AM
> To: Church, Charles
> Cc: [email protected]
> Subject: Re: [c-nsp] 10 gig ethernet interface up, line protocol  
> down on VSL connection
>
>
>> Are you negotiating the channel (PAGP/LACP) or is it configured to
>> channel mode "ON"? IIRC Cisco recommends "ON" for the VSL. The
>> behaviour that you descibe looks like one interface is configured to
>> mode ON and the other end tries to negotiate the portchannel.
>
>> hth,
>
>> Reinhold
>
> Yep, I'm using 'on'.  Here's the config for the Po and physical  
> ints.  Same on the other one too:
>
> interface Port-channel10
> description Switch 1 link to Switch 2
> no switchport
> no ip address
> switch virtual link 1
> mls qos trust cos
> no mls qos channel-consistency
> end
>
> Router#sh run int t1/5/4
> Building configuration...
>
> Current configuration : 116 bytes
> !
> interface TenGigabitEthernet1/5/4
> no switchport
> no ip address
> mls qos trust cos
> channel-group 10 mode on
> end
>
> Thanks,
>
> Chuck
>
>
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to