Morning,
PSes with "Output Fail" red lights. Upon close investigation it looks
[...]
Has any seen two PSes seemily die at the same time? Deep down I think
I *think* (read: I might be wrong but) that the PSes also switch off and show OUTPUT FAIL when the router is shutdown from the supervisor. I have seen this e.g. on a 6509 (what was the difference between the 7600 and ... just kidding) that got shutdown from the Sup720 because there was no high speed fan-tray 2 in the chassis after 300 seconds or so. The 6509 made a *click* and was off. PSes showing OUTPUT FAIL. So this might be a software/hardware problem you are seeing but not related to the PSes. -Sascha _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
