We need to keep in mind this isn't ios. They have cleaned up a lot of this
from ios and I welcome it.
>
> VLAN service policies are applied in vlan config mode, not under the SVI.
This allows you to tie a policy to a vlan without forcing you to create an
SVI. Here the N7K does stray from _normal_ cisco logic, but it works as
designed.
>
>
> 7010-A(config)# vlan 99
> 7010-A(config-vlan)# service-policy ?
> input Input Service Policy
> output Output Service Policy
> type Specify the type of this policy
>
>
> 7010-A(config-vlan)# service-policy input foo
> 7010-A(config-vlan)#
>
> /Sven
>
>
> On 2 sep 2010, at 18.00, [email protected] wrote:
>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Thu, 2 Sep 2010 16:07:45 +0100
>> From: Matthew Melbourne <[email protected]>
>> To: "Arie Vayner (avayner)" <[email protected]>
>> Cc: [email protected]
>> Subject: Re: [c-nsp] N7k: Attaching a service-policy to an SVI
>> Message-ID:
>> <[email protected]>
>> Content-Type: text/plain; charset=ISO-8859-1
>>
>> The service-policy command doesn't appear to be there under the SVI...
>
>
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
