Eric, Dmitry, On 27.10.2010 16:42, Eric Van Tol wrote: > Hello, > Check your SDM template - you probably have it set to 'layer-2' when it > should be 'default' for layer 3 routing.
Thanks, this fixed the ME's behavior in my test setup, problem is the switch I have running at the customer site already has the "sdm default" config on it ... though, it might be that the second switch (which has the redundant line on it, and should only be used when the primary switch fails) is somehow causing some problems, it still had the layer2 setting ... I have updated the config on that one, and will have to do some tests to see whether it works better now ... Garry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
