> -----Original Message----- > From: Garry [mailto:[email protected]] > Sent: Thursday, October 28, 2010 9:22 AM > To: Eric Van Tol > Cc: [email protected] > Subject: Re: [c-nsp] Routing performance of ME3400 > > On 27.10.2010 16:42, Eric Van Tol wrote: > > Hello, > > Check your SDM template - you probably have it set to 'layer-2' when it > should be 'default' for layer 3 routing. > > Customer confirmed ... did some more performance tests, switch is now > operating at decent performance ... :) > > Thanks again for the hint! s...@cks though that the option isn't shown in > the config ... > > -garry
No problem - we ran into this on a few of our switches, too. I always thought it was counterintuitive that they named the Layer 3 SDM 'default' even though it really isn't the default SDM template. -evt _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
