On 27.10.2010 16:42, Eric Van Tol wrote: > Hello, > Check your SDM template - you probably have it set to 'layer-2' when it > should be 'default' for layer 3 routing.
Customer confirmed ... did some more performance tests, switch is now operating at decent performance ... :) Thanks again for the hint! s...@cks though that the option isn't shown in the config ... -garry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
