Interface status, route tables, throughput, etc. Its all there. -Blake
On Wed, Nov 3, 2010 at 13:08, Garry <[email protected]> wrote: > Hi, > > we've set up a customer with a DMVPN with multiple sites, including > redundant routers and links. Now, using regular Layer3 methods, it's not > possible to check whether a DMVPN link is up or not, e.g.: Site A has > two Hub routers, Site B has two spoke routers. Both Spoke routers > connect to both hub routers. EIGRP takes care of the routing, preferring > the link between the two primary routers. Using ICMP, all I can see is > that I can reach both spoke router's DMVPN IPs. I can't tell though, > whether B2 has an active tunnel to A2, as the routing via A1-B1 link. > > Are there any SNMP fields I can query to see whether the links are up? > > Tnx, Garry > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
