I would monitor nhrp registrations and routing protocol neighbors on the hubs. If you need to go to the spokes then the same thing from there, they at least will have a smaller count so it will be easier to determine what is happening from their perspective.
David -- http://dcp.dcptech.com > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Garry > Sent: Wednesday, November 03, 2010 4:32 PM > To: Jonathan Herbert > Cc: [email protected] > Subject: Re: [c-nsp] SNMP-Check of DMVPN Tunnels? > > On 03.11.2010 20:22, Jonathan Herbert wrote: > > We just run an IGP and query throughput on the Tu interfaces. If the > > crypto > > socket is down, you'll end up with rxbps = 0. Seems to work well. > > The problem is that both Spoke->Hub connections run through the same > DMVPN tunnel interface ... and I would prefer not to complicate the > configuration by adding additional tunnels ... :) > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
