Hello, Thanks Pete. Yes, got access to it. Looks I'm hit by this bug :
*on bootup message "MPLS software is disabled on this linecard" displayed * *Symptom:* on bootup message MPLS software is disabled on this linecard displayed on bootup following messages are seen ZEAL#sh log | i MPLS *Dec 10 16:15:00.551: %LFD-CFC7-6-RESOURCE: MPLS software is disabled on this linecard*Dec 10 16:20:07.063: %LFD-CFC7-6-RESOURCE: MPLS software is disabled on this linecard *Conditions:* message can be displayed on any line card with the functionality: "line cards where MPLS related activity will not be handled MPLS software and they are handled by MPLS h/w(handled by the centralized EARL)." Example: CFC line card has such functionality. On CFC line cards while bootup this message will be seen *Workaround:* message displaying changed to "MPLS supported in hardware forwarding only" *Further Problem Description:* So, purely cosmetic, right ? MPLS will still be handled by hardware ? Regards. Y. 2010/11/21 Pete Lumbis <[email protected]> > (replying all this time). > > If you have access to the bug toolkit also check out CSCsl72880. > > On Sun, Nov 21, 2010 at 11:56 AM, Pete Lumbis <[email protected]> wrote: > > I believe that this is because it's a CFC module. It's just telling > > you that hardware forwarding won't happen on the linecard and will > > happen on the RP. > > > > On Sun, Nov 21, 2010 at 11:52 AM, Youssef Bengelloun-Zahr > > <[email protected]> wrote: > >> The other LC hardware version is 2.9. Both LCs have standard CFC > modules, no DFCs. > >> > >> Under CLI, I can see mpls commands and sub-commands. > >> > >> Just wanted to know the meaning of the message That's appeared in the > logs, probably purely informational. > >> > >> Can anyone confirm for sure ? > >> > >> Y. > >> > >> > >> > >> Le 21 nov. 2010 à 17:42, Nick Hilliard <[email protected]> a écrit : > >> > >>> On 21/11/2010 16:38, Youssef Bengelloun-Zahr wrote: > >>>> Mod MAC addresses Hw Fw Sw > >>>> Status > >>>> --- ---------------------------------- ------ ------------ > ------------ > >>>> ------- > >>>> 7 0025.84d7.89cc to 0025.84d7.89cf 3.1 12.2(14r)S5 > 12.2(33)SXH2 Ok > >>>> > >>> [...] > >>>> No DFC installed on it ! > >>> > >>> hardware looks ok then. 3.1 is fine, and so long as you didn't > accidentally install a dfc3a, it should be ok. > >>> > >>> Nick > >> > >> _______________________________________________ > >> cisco-nsp mailing list [email protected] > >> https://puck.nether.net/mailman/listinfo/cisco-nsp > >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > -- Youssef BENGELLOUN-ZAHR ……………………………………………… Ingénieur Réseaux et Télécoms Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE Tel +33 (0) 825 000 720 Tel. direct +33 (0) 1 77 35 59 14 Tel. portable +33 (0) 6 22 42 63 80 Email [email protected] ……………………………………………………………………………….....www.720.fr _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
