Hello,
On Tue, 23 Nov 2010, Elmar K. Bins wrote:
I am trying to set up a test port - for an IP phone actually - with
the office WS VLAN (402) native untagged, and the Voice VLAN (498)
tagged on this 3560-48 (12.2(25)SEE4).
My config looks like this:
#sh run int f0/44
interface FastEthernet0/44
description ekb Testport
switchport access vlan 402
switchport trunk encapsulation dot1q
switchport trunk native vlan 402
switchport trunk allowed vlan 498
switchport mode trunk
load-interval 30
end
why don't you use:
switchport mode access
switchport access vlan 402
switchport voice vlan 498
Your setup doesn't work probably because you haven't allowed the native
vlan too.
You should have:
switchport trunk allowed vlan 402,498
Best Regars,
John
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
