On 13.12.2010 13:59, David Rothera wrote: > Could you run a 'sh dsl int at0' and paste the input. I have pretty much > every single DSL firmware for the 877 including ones that drastically improve > ADSL2 performance but I'm not too sure if the 876 takes the same firmware...
The 877 (which is for Annex-A) most likely uses a different DSL firmware than 876 (Annex-B) ... Init FW: init_AMR-3.0.014_no_bist.bin Operation FW: AMR-3.0.014.bin FW Source: embedded FW Version: 3.0.14 Tnx, Garry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
