We do have circuits that use Annex-M that are using the same FW but not sure if it also supports Annex-B...
Unfortunately no SP offers Annex-B in the UK, it is either A or M. On 13 Dec 2010, at 13:12, Garry wrote: > On 13.12.2010 13:59, David Rothera wrote: >> Could you run a 'sh dsl int at0' and paste the input. I have pretty much >> every single DSL firmware for the 877 including ones that drastically >> improve ADSL2 performance but I'm not too sure if the 876 takes the same >> firmware... > > The 877 (which is for Annex-A) most likely uses a different DSL firmware > than 876 (Annex-B) ... > > Init FW: init_AMR-3.0.014_no_bist.bin > Operation FW: AMR-3.0.014.bin > FW Source: embedded > FW Version: 3.0.14 > > Tnx, Garry _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
