Sorry for third post
> -----Original Message-----
> From: Tomas Daniska
> Sent: Wednesday, December 15, 2010 11:23 AM
> To: 'Peter Rathlev'; cisco-nsp
> Subject: RE: [c-nsp] XMODEM transfer over telnet/ssh, any chance?
>
> I used to use Dialout/EZ a while ago, it creates a virtual COM port to a
> reverse telnet session. You can use your favorite terminal app to do the
> X/Y/Zmodem stuff. Worked like a charm
re your problem with special characters - there are several ranges of TCP ports
for the rev telnet.
The standard 2xxx range is telnet interpreted. One of the higher ranges is
8-bit raw, you need 4xxx to get best results:
Range Description
--------- ------------------------------------------------------
2000 normal TELNET (full options negotiations, remote echo)
see RFC-854, also stuff on TELNET in RFC-1123
3000 normal TELNET to rotary
4000 raw TCP (stream) - no TELNET NVT. See RFC-793.
5000 raw TCP (stream) to rotary
6000 TELNET binary mode - see RFC-856
7000 TELNET binary mode to rotary
8000 forward Xremote
9000 reverse Xremote
10000 reverse Xremote to rotary
> --
>
> deejay
>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
