On Wed, 2010-12-15 at 10:30 +0000, Tomas Daniska wrote: > Sorry for third post
No problem for me. :-) > re your problem with special characters - there are several ranges of > TCP ports for the rev telnet. > > The standard 2xxx range is telnet interpreted. One of the higher > ranges is 8-bit raw, you need 4xxx to get best results: [...] I've actually been using port 6001 for this. I tried port 4001, but that makes the telnet session itself have problems; it doesn't seem to receive all string as they are, some characters are discarded. I can maybe try to give the commands via port 6001 and then reconnect to port 4001 for the XMODEM transfer. I'll keep the list posted... :-) -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
