On Wed, 2010-12-15 at 11:42 +0100, Peter Rathlev wrote: > On Wed, 2010-12-15 at 10:25 +0000, Tomas Daniska wrote: > > Or just for fun, you can use two routers and create an aux-to-aux > > tunnel over ssh/telnet, so you can use the serial port on your PC as > > if the device was local to you ;-) > > I'll try that, it doesn't sound at all impossible that it will work. :-)
Meh, couldn't get that to work either. I still get NAKs on the XMODEM transfer from within minicom, which uses lszrz. I also tried starting a completely seperate process with "sx file.bin < /dev/ttyUSB0 > /dev/ttyUSB0" but still no luck. I followed this guide to configure the AUX tunnel: "How to Tunnel Async Data" http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080160c4d.shtml -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
