I'm trying to get QoS on a subinterface of an OC3 to work correctly. I have been able to get it working for PPPoA interfaces in the past but the same method isn't working for me.
This is how I have things declared: class-map match-all VOIP-TRAFFIC match access-group name MY-VOICE ! ! policy-map OUTPUT-POLICER class VOIP-TRAFFIC priority 100 set dscp ef class class-default fair-queue policy-map MAP-1536-OUT class class-default shape average 1536000 service-policy OUTPUT-POLICER policy-map MAP-3072-OUT class class-default shape average 3072000 service-policy OUTPUT-POLICER policy-map MAP-256-OUT class class-default shape average 256000 service-policy OUTPUT-POLICER ip access-list standard EVERYTHING permit any ! ip access-list extended MY-VOICE permit ip x.x.x.0 0.0.0.63 any interface ATM4/0.605 point-to-point description FCP 3 Admin ip address 192.168.110.9 255.255.255.252 pvc 5/45 protocol ip 192.168.110.10 broadcast encapsulation aal5snap ! Trying to add service-policy output MAP-1536-OUT to the subinterface gives me the error GTS : Not supported on this interface If I add it to the PVC I get the error GTS : Not supported over ATM VCs Thanks for any help. I have done a lot of research and googling but have not had any luck finding something that will work for me. This is running on a 7200 12.4 with a PA-A3-OC3SMI and a NPE-GE1. Dave -- Dave Weis 515-224-9229 [email protected] http://www.internetsolver.com/ Please check out our Complete Support Service http://www.internetsolver.com/completesupport/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
