The comment for disabling PXF was meant specifically for 7401, as I am quite sure there are no PXF enhancements for the AToM functionality on this platform (it is an old end of life box). The 7304 is a different animal, and you should not consider this comment relevant (I am not really sure what is implemented on 7304 in PXF, but again - a different kind of animal)
Arie -----Original Message----- From: Ge Moua [mailto:[email protected]] Sent: Wednesday, January 19, 2011 20:29 To: Arie Vayner (avayner); cisco_nsp Subject: Re: [c-nsp] EoMPLS on 7401ASR the comment about "disable PXF when testing" I thought the PXF engine was suppose to allow more cef-like switching for things like xconnect pseudowires. Is it generally a bad idea to disable this? I'm asking because we have 7304 w/NSE-100 engines (with PXF enabled). Any feedback would be appreciated. -- Regards, Ge Moua Network Design Engineer University of Minnesota | OIT - NTS 2218 University Ave SE -- On 01/19/2011 12:02 PM, Arie Vayner (avayner) wrote: > Jeroen, > > The 7400 has reached Last Day of Support on December 2009, so I do not > really believe it is on any support contract with Cisco... > http://www.cisco.com/en/US/prod/collateral/routers/ps354/prod_end-of-lif > e_notice0900aecd8010d319.html > > Anyway, I can see on the download tool that 12.4(15)T is available for > this platform. I am quite sure it would have at least basic AToM > functionality (not 100% sure)... > > Don't forget to disable PXF when testing... > > Arie > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Jeroen van Ingen > Sent: Wednesday, January 19, 2011 18:35 > To: [email protected] > Subject: [c-nsp] EoMPLS on 7401ASR > > Hi, > > I've been experimenting with AToM (mainly EoMPLS) in a lab situation and > I'd like to make my test network a bit larger, but the only extra > hardware that I have available are old 7400 boxen (7401ASR). > > Now according to the Software Advisor and the docs on AToM, the 7400 > should support this feature starting from IOS 12.2(14)S. However the > images that Software Advisor lists can't be downloaded. > > I understand that it this old stuff might be full of bugs (considering > the track record of 7400/PXF and the age of this image), but does anyone > happen to have a compatible IOS image in their archives? Preferably > c7400-k91p-mz.12.2-14.S8 but I guess any c7400-*12.2*.S* will do. > > By the way, our 7400 are still under a maintenance contract, but the > distributor is having a hard time getting this image (TAC couldn't find > it for them, if I understood correctly). Since the reach of this list is > much greater I was hoping that someone would happen to have this image > in their archives... > > > Regards, > > Jeroen van Ingen > ICT Service Centre > University of Twente, P.O.Box 217, 7500 AE Enschede, The Netherlands > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
