Jeroen, We're doing AToM / EoMPLS on a few 7206VXR NPE-G1 with no problems, we're using Ver 12.2(33)SRC6 IOS Hope this helps Ziv
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jeroen van Ingen Sent: Friday, January 21, 2011 1:27 AM To: [email protected] Cc: [email protected] Subject: Re: [c-nsp] EoMPLS on 7401ASR Hi Arie, list, > A quick check on the KB shows that 12.4(15)T should have EoMPLS > support... Hope my search was not too quick. > Alas... tried 12.4(15)T11 (,jk9o3s) but: * "xconnect" only supports L2TPv3, not MPLS encap * "mpls l2transport" commands not available * "show mpls l2transport capability int <if>" only shows "core" functionality, edge is not supported: === Transport type Eth VLAN Core functionality: MPLS label disposition supported Control word processing supported Sequence number processing not supported VCCV CC Type CW [1] processing supported Edge functionality: Not supported Transport type Ethernet Core functionality: MPLS label disposition supported Control word processing supported Sequence number processing not supported VCCV CC Type CW [1] processing supported Edge functionality: Not supported === That's about the same output as on my ancient c7200 with NPE-200 and 100FX interface. I guess the "edge" functionality is what's missing every time. I managed to find a 12.2S image, but it is 12.2(14)S5 and AToM support was first included in 12.2(14)S8 according to the docs I found. So I guess I'll have to give up here and see if I can get some affordable hardware for my AToM labbing. What I've found so far is that a 7200VXR with gig interfaces might do it... (open to suggestions and I'd still be eternally grateful to anyone who can throw a c7400 12.2(14)S8 or higher image in my direction). - Jeroen _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ The information contained in this e-mail message and its attachments is confidential information intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the sender, and then delete the message from your computer. Thank you! ******** This mail was sent via Mail-SeCure System.******** ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
