IPv6 Unicast Routing and host connectivity are being planned for Q4CY11. 6PE and 6VPE are being planned for Q2CY12.
-Waris -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Keegan Holley Sent: Tuesday, March 29, 2011 10:54 AM To: Leigh Harrison Cc: [email protected] Subject: Re: [c-nsp] New Joiner - ME3600X and tools On Mon, Mar 28, 2011 at 8:06 AM, Leigh Harrison < [email protected]> wrote: > Hello there group, > > > First question then: > > We're just about to buy a job lot of ME3600X's - anyone using them and > any feedback on them (especially on them running IPv6)? > > covered > > > And Second questions whilst I'm on: > > What tools are you guys using (ideally open source ones) to keep an eye > on your networks? (Especially Jitter) > to answer your original question the cisco gear and the other metro vendors have built in management and monitoring capabilities in CFM and *ITU*-T G.8261 (cisco may have made a proprietary version as they did with ITU G.8032/REP). You can usually just graph the readings with the standard open source tools. I can't recommend one as I've never used OSS for this in production, but it's not really complicated to setup though. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
