Hi Peter,
What kind of other solution Peter?
On 15/07/11 10:51, Peter Rathlev wrote:
On Fri, 2011-07-15 at 09:07 +0200, Alexandre Durand wrote:
I have been trying to force a giga port to come up without any
physical device connected on this port wuith a c6500. I thought the
trick was to set no keepalive on the interface but the port is not
coming up and stays down.
AFAIK the Catalyst switches cannot "fake" an up link. The specific
problem you're trying to solve might have another solution though.
--
Alexandre DURAND
TAS FRANCE
WTC 1-K, 1300 route des Crêtes
06560 Valbonne Sophia Antipolis
Phone : +33 (0)4 92 94 56 93
Fax : +33 (0)4 92 94 33 99
Web: http://www.tasfrance.com
Email : [email protected]
peering: http://as8554.peeringdb.com
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
