Hi Andrew,
No negociate is not available ont he interface. and i forced speed and
duplex but with no success to turn this port up.
regards
On 15/07/11 11:05, Andrew Miehs wrote:
On Fri, Jul 15, 2011 at 9:07 AM, Alexandre Durand
<[email protected]
<mailto:[email protected]>> wrote:
I have been trying to force a giga port to come up without any
physical device connected on this port wuith a c6500. I thought
the trick was to set no keepalive on the interface but the port is
not coming up and stays down.
I also disabled auto negogation and turned the port in to speed
1000 and duplex full but wih no sucess either.
Is there someone who has ever experienced the trick?
On an ethernet you could try enabling "no negotiate" on the interface,
and force speed and duplex.
Regards
Andrew
--
Alexandre DURAND
TAS FRANCE
WTC 1-K, 1300 route des Crêtes
06560 Valbonne Sophia Antipolis
Phone : +33 (0)4 92 94 56 93
Fax : +33 (0)4 92 94 33 99
Web: http://www.tasfrance.com
Email : [email protected]
peering: http://as8554.peeringdb.com
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
