Ewwwhhh ickie > -----Original Message----- > From: [email protected] [mailto:cisco-nsp- > [email protected]] On Behalf Of Nick Hilliard > Sent: Wednesday, August 03, 2011 12:50 PM > To: Chris Adams; [email protected] > Subject: Re: [c-nsp] half duplex question > > On 03/08/2011 18:25, Chris Adams wrote: > > 10Mbps/half-duplex is not the same as 5Mbps/full-duplex. In my > > experience, 10Mbps/half-duplex will be able to get about 3Mbps > > throughput before collisions bog everything down. > > this brings up horrible memories of having to connect two routers together > using 2 x 10M half-duplex links and using ospf weighting to get TX running > down one link and RX down the other. I.e. synthesised virtual 10M full > duplex. Ghetto, but when there's no budget to buy more routing gear... > > Nick > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
