Hi, On Wed, Aug 03, 2011 at 07:50:06PM +0100, Nick Hilliard wrote: > this brings up horrible memories of having to connect two routers together > using 2 x 10M half-duplex links and using ospf weighting to get TX running > down one link and RX down the other. I.e. synthesised virtual 10M full > duplex. Ghetto, but when there's no budget to buy more routing gear...
Bah, needs too much wires...
interface ethernet 3/0/1
transmit-interface ethernet 3/0/2
(plus proper cables). *That* was a horrible hack...
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgpzEk4KecSF3.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
