On (2011-08-17 13:48 -0400), Scott Granados wrote: > In what configuration does an NPE G1 load tables in under a minute?
Just loaded from SUP720-3BXL -> NPE-G1, 383k routes in under minute. And InQ was almost all the time 0 in NPE-G1, as SUP720-3BXL wasn't sending fast enough. Router had other session up, receiving 446k prefixes on that session. NPE-G1# sh ip bgp summary ... Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd SUP720-3BXL 4 MAHAS 55538 5 119868995 0 0 00:00:59 383819 Took another 15s or so to hit 446k. But not interesting result, as SUP720-3BXL is capping this. NPE-G2 from same SUP720-3BXL hit 296k routes in 1min, and saw constant InQ, hitting 446k in 1m50s Both have large MSS size and no hold-queue drops and are running SRD4. However NPE-G1 has base load of 1%/0%, NPE-G2 has base load of 17%/16%. -- ++ytti _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/