I'm running IOS 12.4-12c advanced IP services. LACP is supposedly supported, and I can create a port-channel and add the gigabit ethernet interfaces to it.
However, I can't find any of the LACP configuration commands such as mode active/passive, system-ID, etc. Any help would be appreciated. I suspect I need a different IOS or possibly feature set, but have tried several with no success. Bug toolkit returns nothing obvious. -- Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/