I have no idea if/whee this is supported on the 7200 but my first suggestion would be to try T train code if you don't see it in mainline.
On Friday, August 26, 2011, Jay Hennigan <[email protected]> wrote: > I'm running IOS 12.4-12c advanced IP services. > > LACP is supposedly supported, and I can create a port-channel and add > the gigabit ethernet interfaces to it. > > However, I can't find any of the LACP configuration commands such as > mode active/passive, system-ID, etc. > > Any help would be appreciated. I suspect I need a different IOS or > possibly feature set, but have tried several with no success. Bug > toolkit returns nothing obvious. > > -- > Jay Hennigan - CCIE #7880 - Network Engineering - [email protected] > Impulse Internet Service - http://www.impulse.net/ > Your local telephone and internet company - 805 884-6323 - WB6RDV > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
