Jay, >From what I could find, LACP is not supported on 7200 (where did you see a reference for it being supported?) You could use PAgP if the other platform supports it...
Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jay Hennigan Sent: Saturday, August 27, 2011 00:55 To: '[email protected]' Subject: [c-nsp] LACP in 7206VXR with NPE-G1 I'm running IOS 12.4-12c advanced IP services. LACP is supposedly supported, and I can create a port-channel and add the gigabit ethernet interfaces to it. However, I can't find any of the LACP configuration commands such as mode active/passive, system-ID, etc. Any help would be appreciated. I suspect I need a different IOS or possibly feature set, but have tried several with no success. Bug toolkit returns nothing obvious. -- Jay Hennigan - CCIE #7880 - Network Engineering - [email protected] Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
