Well, ideally we¹d just cross-connect them, but anything that effectively bridges them together would be great.
VRF might do the trick. Thanks, -Nick Voth From: Jay Nakamura <[email protected]> Date: Tue, 13 Sep 2011 11:56:11 -0400 To: Nick Voth <[email protected]> Cc: "[email protected]" <[email protected]> Subject: Re: [c-nsp] Bridging T1s together on PA-MC-T3 Are you actually Ethernet bridging or just want to TDM cross connect? I don't think you can cross connect it but perhaps you can create a VRF and route IP? On Sep 13, 2011 11:47 AM, "Nick Voth" <[email protected]> wrote: > Folks, > > I'm hoping this is easy/obvious question, but I've looked around and can't > find the config I'm looking for. > > I have several channelized DS3s coming in and terminating on PA-MC-T3 cards. > I use those for regular "ppp" T1 circuits out to client sites. > > I now have the need to "bridge" 2 client sites together, and am wondering if > there's a way to bridge 2 individual T1 circuits together on one DS3 card. > > The 2 client sites don't need access to our LAN or Internet. This would > literally be a private line connection between the 2 sites, with us in the > middle bridging them together. > > The client's Internet access is totally separate from this proposed > solution. > > I know I can have the local telco just do a point-to-point circuit between > the 2 client sites, but then we wouldn't have any visibility for up/down > monitoring, etc. > > Any advice would really help. > > Thanks, > > -Nick Voth > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
