Actually what you want is L2TPv3 local switching of PPP frames it sounds like.
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html#wp1043078 - jared On Sep 13, 2011, at 11:56 AM, Jay Nakamura wrote: > Are you actually Ethernet bridging or just want to TDM cross connect? I > don't think you can cross connect it but perhaps you can create a VRF and > route IP? > On Sep 13, 2011 11:47 AM, "Nick Voth" <[email protected]> wrote: >> Folks, >> >> I'm hoping this is easy/obvious question, but I've looked around and can't >> find the config I'm looking for. >> >> I have several channelized DS3s coming in and terminating on PA-MC-T3 > cards. >> I use those for regular "ppp" T1 circuits out to client sites. >> >> I now have the need to "bridge" 2 client sites together, and am wondering > if >> there's a way to bridge 2 individual T1 circuits together on one DS3 card. >> >> The 2 client sites don't need access to our LAN or Internet. This would >> literally be a private line connection between the 2 sites, with us in the >> middle bridging them together. >> >> The client's Internet access is totally separate from this proposed >> solution. >> >> I know I can have the local telco just do a point-to-point circuit between >> the 2 client sites, but then we wouldn't have any visibility for up/down >> monitoring, etc. >> >> Any advice would really help. >> >> Thanks, >> >> -Nick Voth >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
