Alan, Arne: WS-C3750X-24S-E + C3KX-NM-10GT seems to be a perfect solution!
WS-C3750X-24S-E has 24 SFP ports so one could use 12 1000BASE-T SFP's + 2 1000BASTE-LX10 SFP's and C3KX-NM-10GT module provides two 10GBASE-T ports so all the requirements seems to be fulfilled. Jim, I'm afraid WS-C4928-10GE would not suite because two 10GBASE-T ports are must-have. If there would be 10GBASE-T X2 modules available, this switch would be a nice option. Kevin, if possible, I would prefer Cisco. What do you think about "WS-C3750X-24S-E + C3KX-NM-10GT" solution? In addition, are there 10GBASE-T SFP+ modules available on the market(Cisco or third-party)? regards, martin 2011/9/30 Kevin Loch <[email protected]>: > Martin T wrote: >> >> Is there a Cisco switch(non-modular preferably) which fulfils those >> requirements: >> >> 1) 12 or more 1000BASE-T ports >> 2) 2x SFP port for 1000BASE-LX10 SFP's >> 3) 2x 10GBASE-T ports(for IBM 10Gb iSCSI Host Interface Card 81Y9613, >> which has two 10GBASE-T interfaces) > > It's not Cisco but Dell 6248 does have a 2 port 10Gbase-T module > option. The onboard SFP ports will accept any generic 1G SFP's > (for your LX10 optics). > > - Kevin > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
