Martin,
C3KX-NM-10GT allow you to install only two 10Gb SFP+ or 4 1Gbit SFP, or
just ony 10Gbit SFP+ plus 2 1Gbit SFP. You can take look here
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6406/data_sheet_c78-584733.html
at table 4.
On 30.09.2011 23:44, Martin T wrote:
Alan, Arne:
WS-C3750X-24S-E + C3KX-NM-10GT seems to be a perfect solution!
WS-C3750X-24S-E has 24 SFP ports so one could use 12 1000BASE-T SFP's
+ 2 1000BASTE-LX10 SFP's and C3KX-NM-10GT module provides two
10GBASE-T ports so all the requirements seems to be fulfilled.
Jim,
I'm afraid WS-C4928-10GE would not suite because two 10GBASE-T ports
are must-have. If there would be 10GBASE-T X2 modules available, this
switch would be a nice option.
Kevin,
if possible, I would prefer Cisco.
What do you think about "WS-C3750X-24S-E + C3KX-NM-10GT" solution? In
addition, are there 10GBASE-T SFP+ modules available on the
market(Cisco or third-party)?
regards,
martin
2011/9/30 Kevin Loch<[email protected]>:
Martin T wrote:
Is there a Cisco switch(non-modular preferably) which fulfils those
requirements:
1) 12 or more 1000BASE-T ports
2) 2x SFP port for 1000BASE-LX10 SFP's
3) 2x 10GBASE-T ports(for IBM 10Gb iSCSI Host Interface Card 81Y9613,
which has two 10GBASE-T interfaces)
It's not Cisco but Dell 6248 does have a 2 port 10Gbase-T module
option. The onboard SFP ports will accept any generic 1G SFP's
(for your LX10 optics).
- Kevin
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
