[c-nsp] EoMPLS ?s

[Jason LeBlanc]

We're considering using EoMPLS port mode to bridge two datacenters 
together temporarily for a move using sup720-3BXL on both ends with 6724 
blades, probably 2 or 4 gig links, possibly 10g if I can get them to buy 
the HW.  The question I have primarily is with regard to MTU.  I have 
heard there are issues with ensuring both sides match, not much concern 
there.  But the network between the two facilities may be lower than the 
1518 bytes, causing fragmentation.  I know this gets punted to the RP, 
and is going to be a problem.  Is there any work around?

Thanks,
Jason
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/