This is a fantastic info.
Thank you very much.
And yes, you are right, subject is a bit long, I was looking the screen
for a while to find a way to explain the mail but at the end... anyway,
yes, it is a bit long. :-)
Thanks again.
Luis
El 02/11/11 18:30, Peter Rathlev escribió:
On Wed, 2011-11-02 at 15:37 +0100, LM wrote:
kron occurrence T10660 in 2:0 recurring
policy-list T10660
!
kron policy-list T10660
cli show proc mem sort | redirect tftp://10.225.225.1/T10660-$t
$t is not a variable as in the 'archive' command so I can have the
timestamp in every file generated at the tftp.
The kron job would avoid manual operation from a us to capture the info
required to detect a memory leak.
Does anyone none if $t or similar variable is supported somehow on IOS?
I've had better experience with using EEM instead of Kron. If you just
need the filename to semi-unique you could use the uptime:
! Define an RMON event to react only when the CPU is busy
rmon event 10 log description "1 minute avg. CPU> 90%"
rmon event 11 log description "1 minute avg. CPU< 70%"
rmon alarm 10 lsystem.57.0 5 absolute rising-threshold 90 10 falling-threshold
70 11
!
! If using TACACS+ and command authentication you need to specify a username
event manager session cli username "<tacacs-needs-a-username>"
!
event manager applet EEM-copy-mem-usage
event timer cron cron-entry "0 */2 * * *"
action 1.0 info type routername
action 1.1 info type snmp oid 1.3.6.1.2.1.1.3.0 get-type exact
action 2.0 cli command "enable"
action 2.1 cli command "show processes memory sorted | redirect
tftp://192.0.2.10/$_info_routername-$_info_snmp_value-mem-usage.txt";
action 3.0 syslog msg "Memory usage copied to
tftp://192.0.2.10/$_info_routername-$_info_snmp_value-mem-usage.txt";
!
(By the way: Your subject is waaay too long for comfort. Subjects should
not contain information in themselves. :-))
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
