On Tuesday, August 16, 2011 08:02:29 AM Brent Roberts wrote: > Can anyone provide real world BGP Table convergence times > on 3 full Peers on an ASR 1006 RP2 for IPV4. Strictly in > the IP V4 world scheme. Timing reference being sought > is for the equivalent of "CLEAR IP BGP ALL" Command. > Service engine would be a ASR1000-ESP10.
I just brought up an ASR1006 + RP2 + ESP20 + SIP10, peering with 3x route reflectors, receiving a full v4/v6/VPNv4 table from them, simultaneously. For v4, the 1st session was done in about 48 seconds, the other two were done about 10 seconds earlier than that. Hope this helps. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
