On Fri, Nov 11, 2011 at 2:45 AM, Mark Tinka <mti...@globaltransit.net> wrote:
> I just brought up an ASR1006 + RP2 + ESP20 + SIP10, peering > with 3x route reflectors, receiving a full v4/v6/VPNv4 table > from them, simultaneously. > > For v4, the 1st session was done in about 48 seconds, the > other two were done about 10 seconds earlier than that. > > Hope this helps. > > Cheers, > > Mark. Silly question time, but how are you judging that time on - router has stopped receiving prefixes on show ip bgp sum (or neighbor). Or are you defining it having a full feed with some other metric? Thanks _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/