On 01/12/2011, at 4:16 AM, Mark Tinka wrote: >> What are people using for an internal NAT64 prefix? > > We are using a /96 from within our PA allocation.
Good to know. > One thing IOS XE seems to do is accept only one Pref64 > prefixes for the entire chassis. We have scenarios where we > might want to have multiple Pre64 prefixes in the same NAT64 > router. Pushing Cisco on that. My understanding from the options available in the IOS XE CLI (we're on 3.4.0aS) is that I can assign another pref64 to an interface, instead of using the globally assigned prefix. (config)# int gi0/0/2 (config-int)# nat64 prefix stateful fd65::/96 #show nat64 prefix stateful interface Stateful Prefixes Interface NAT64 Enabled Global Prefix GigabitEthernet0/0/0 TRUE TRUE FD64::/96 GigabitEthernet0/0/2 TRUE FALSE FD65::/96 Tom _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
