On Thursday, December 01, 2011 09:07:15 AM Tom Lanyon wrote: > It's not that it doesn't work, it's not supported. :) > > (config)#nat64 prefix stateful 64:ff9b::/96 > %NAT64: Cannot use the well-known prefix 64:FF9B::/96 > for a stateful prefix
If I understand the documentation correctly, it seems to
suggest that the WKP only kicks in if another Pref64 isn't
defined by the operator:
"Well Known Prefix
The Well Known Prefix 64:FF9B::/96 is supported for
Stateful NAT64. During a stateful translation, if no
stateful prefix is configured (either on the
interface or globally), the WKP prefix is used to
translate the IPv4 host addresses."
Cheers,
Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
