We had a 40-port card fail on an ASR9K and I'm trying to see what configuration was on those interfaces, but I can't find the right command. The router has basically decided that the card doesn't exist for most purposes. I thought that if I did a "show running-config" I would see those interfaces listed as preconfigured interfaces, but that is not the case. My experience with IOS-XR is somewhat limited. How do I see the configuration for those interfaces prior to replacing the card?
Thanks! John _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
