I thought for sure there was a command that would show the preconfigured interfaces. As soon as I insert the new card, the preexisting configuration will magically appear again. I just want to verify what that configuration is. I just found the command "show running-config all-interfaces" which at least lists the missing interfaces, but it doesn't actually show their configuration. That seems strange.
IOS-XR is definitely a strange beast. lol I like it, but it's taking a while to get used to it. On Tue, Dec 27, 2011 at 11:31 AM, Mark Tinka <[email protected]> wrote: > On Wednesday, December 28, 2011 02:19:24 AM Jason Lixfeld > wrote: > >> Show config rollback last X (or some variant of that) >> should show you what you want to see. > > 'sh configuration rollback changes last' to be exact. > > But that will only show the OP changes that were applied to > a running configuration. > > I think what the OP is looking for is, basically, a version > of the total configuration prior to a line card being pulled > out. > > To increase your chances of finding this, John, I'll suggest > checking the high-numbered commits, e.g., 90, 91, e.t.c., or > the commits that correspond to when the line card was first > installed into the router. > > Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
