Show config rollback last X (or some variant of that) should show you what you want to see.
-- Sent from my mobile device On 2011-12-27, at 11:43 AM, John Neiberger <[email protected]> wrote: > We had a 40-port card fail on an ASR9K and I'm trying to see what > configuration was on those interfaces, but I can't find the right > command. The router has basically decided that the card doesn't exist > for most purposes. I thought that if I did a "show running-config" I > would see those interfaces listed as preconfigured interfaces, but > that is not the case. My experience with IOS-XR is somewhat limited. > How do I see the configuration for those interfaces prior to replacing > the card? > > Thanks! > John > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
